
OPERATION SECTION
DRIVELINE ATTACHMENT
attachment.
To connect the cutter driveline to the
forth several times to ensure a secure
attachment.
groove on the Tractor PTO shaft. A driveline not attached correctly to the Tractor PTO shaft could
OPERATION
FL15M 02/07 Operation Section 4-15
© 2007 Alamo Group Inc.
OPERATION
44R EQUAL ANGLE DRIVELINE ADJUSTMENT
Adjust drawbar length per operating speed of mower. When connecting drive always check driveline yoke
phasing. The end yokes on jackshaft and maindrive should all be in line. Adjust height of jackshaft support
bearing up or down so that entire drive is in a straight line from tractor to implement.
8. DRIVELINE ATTACHMENT
The driveline yoke and tractor PTO shaft must be
dirt free and greased for attachment.
To connect the mower driveline to the tractor PTO
output shaft, pull the driveline yoke collar back and
align the grooves and splines of the yoke with those
of the PTO shaft. Push the driveline yoke onto the
PTO shaft, release the locking collar, and position
the yoke until the locking collar balls are seated
onto the PTO shaft. Push and pull the driveline
back and forth several times to ensure a secure
attachment. OPS-R-0003_A
e
connecting yoke spring activated locking collar slides freely and the locking balls are seated
securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the
Tractor PTO shaft could come loose and result in personal injury and damage to the Implement.
(S3PT-17)
WARNING
Kommentare zu diesen Handbüchern